 |
|
ISO 9001:2000 Registered |
|
|
| |
|
| |
|
| |
Thermosets
Please click on material below for product details and
specifications:
|
|
GPO-1
Polyester Laminate
GPO-1 is a general-purpose fiberglass reinforced
laminate. It is easily fabricated and cost
effective. GPO-1 is a good choice for dry-type
transformers, motors and a various other
applications.
Download
GPO-1
Datasheet
(PDF)
GPO-2
Polyester Laminate
GPO-2 is a flame resistant fiberglass-reinforced
laminate that exhibits high strength. It is
easily fabricated and cost effective. GPO-2 is a
good choice for use with terminal boards,
control panels.
Download
GPO-2
Datasheet
(PDF)
GPO-3
Polyester Laminate
GPO-3 is a mineral filled, continuous
fiberglass-reinforced thermoset unsaturated
polyester material. Its high strength, flame
resistance, and low smoke generation makes GPO-3
the industry standard for flame and arc
resistant electrical insulation, and it is used
frequently in the transportation industry -
where smoke generation and toxicity are a prime
concern. GPO-3 is a good choice for use in switch gears
and control panels.
Download
GPO-3 Grade 1580
Datasheet
(PDF)
Download
GPO-3 Grade 1494
Datasheet
(PDF) |
|
|
SG-200
SG-200 is a high temperature and
strength laminate. It is suitable for use in a
wide range of applications that require advanced
thermal endurance. SG-200 carries a U.L. thermal
recognition with a temperature index of 210
degrees Celsius. SG-200 is frequently used in
power supplies and dry type transformers.
Download SG-200
Datasheet
(PDF) |
|
|
HST II
HST-II is the benchmark in the industry for high
temperature polyester laminates. It exhibits
outstanding retention of electrical and
mechanical properties at elevated temperatures.
HST-II carries a U.L. thermal recognition of 220
degrees Celsius for electrical applications and
210 degrees Celsius for mechanical applications.
Use of HST-II is common where materials with
high thermal capabilities are required such as
high-voltage transformers and D.C. motors. |
|
|
Micarta® Industrial Laminates
Micarta® Industrial Laminates are
high-pressure laminates that include canvas (C),
canvas electrical (CE), linen (L), linen
electrical (LE), epoxy glass FR-4 and G-10. It is available in rods, sheets and
tubes. |
|
|
|
Paper Based Laminates
Paper Based Laminates vary from
two-ply paper-thin films to thick boards.
Mechanical and Electrical grade Paper Based
Laminates are used in a wide range of
applications in many industries. They are good
electrical insulators. Paper Based Laminates have high mechanical
strength, low water absorption and are resistant
to acids and alkalis. |
|
|
|
Cotton Fabric Based Laminates
Cotton Fabric Based Laminates are
useful in applications requiring mechanical
strength or wear resistance and are available in
a variety of grades. Fine weave grades provide
good electrical and mechanical qualities;
machines well, and are suitable for intricate
components. Medium weave grades provide an
improved wear resistance when intricate
machining and surface finish are not essential,
such as in low voltage electrical applications.
Medium weave/canvas grades mixed with phenolic
resins provide low moisture absorption, good
wear resistance and mechanical strength and are
economical. Cotton fabric based laminates are
useful for structural supports, bearing
surfaces, piston rings and gears. |
|
|
|
Glass Fabric Based Laminates
Glass fabric grades provide high
mechanical strength, good electrical performance
and are useful where wear resistance is not
needed. Glass Fabric Based Laminates offer good
resistance to boiling water and provide a higher
maximum operating temperature and oxygen index
than polyester laminates. Applications for Glass
Fabric Based Laminates include acid and alkali
resistant linings, storage tanks and fume
stacks. Glass fabric grades have high mechanical
strength, advanced electrical properties and
perform well at high temperatures. |
|
|
Stand-off Insulators
Stand-off Insulators are used for grounding bars, panel boards,
ground kits, bus connectors, busbar insulators,
switchboards and buss bar applications. All components are
available with a variety of standard threaded
insert sizes including metric threads. Composite
insulators are an improvement over porcelain
insulators because they provide impact
resistance. |
|
|
|
|
Technical Specifications |
| To download material
specifications for available grades and
manufacturers of the materials listed on
this page, we recommend the following links:
www.ides.com
Materials Database
www.plasticstechnology.com
|
|
| |
|
|
|
|
|
|
|
When you choose Jaco,
you can expect the best in injection molding, stamping,
machining and
plastic die-cutting services. |
|
|
ISO 9001:2000 Registered
Sitemap |
|
|
|
|
Plastic Machining, Plastic
Injection Molding, Custom Steel Rule Die Cutting & Plastic
Stamping
Serving North America from North East Ohio including Cleveland, Akron, Canton, Ohio
All of the information, suggestions, and recommendations pertaining to the properties and uses of the product described herein are based upon tests and data believed to be accurate, however, the final determination regarding the suitability of any material described herein for the use contemplated, the manner such, and whether the use infringes any patents is the sole responsibility of the user. THERE IS NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Under no circumstances shall we be liable for incidental or consequential loss or damage.
|
|
